 | Combo Look Digital Terrestrial and Satellite Meter + Spectrum Analyser
Combo look The combination of SATLOOK Digital NIT and TVLOOK
Input frequency: 2-900 MHz and 920-2150 MHz
4.5" B/W Monitor for PAL/NTSC/SECAM
Lots of memory positions for spectrum pictures
RS232 for PC-connection
Built in, rechargeable battery.
Only 7kg complete with carrying case TV-PART:
2-900 MHz spectrum analyser
Presents full range spectrum (and expanded)
Very high accuracy,
1dB (at 20C)
SAT-part: 920-2150MHz spectrum analyser. Digital BER, QPSK and S/N-ratio
Satellite-ID and TV/Radio-channel info (NIT)
Tunable audio bandwidth 5.5-8.5MHz
LNB voltage 13/18V, 22kHz tone switch
DiSEqC according to level 1.0, 1.1, 1.2
KU- and C-band (normal/inverted video)
The COMBOLOOK is a Swedish made SAT-TV/CATV instrument and spectrum-analyser. It is a combination of SATLOOK Digital NIT and TVLOOK in one unit. The unit is made for exact alignment and adjustment of satellite-dishes, aerial antennas. It is also an excellent tool for working with Cable-TV networks. It is intended for professional use when high accuracy and precise information are needed. It's easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to understand and takes only minutes to learn.
The instrument is provided with a 4.5 inch B/W-monitor which either shows normal TV-channel, the frequency spectrum 2-2150 MHz (or parts thereof) alt. Digital data. Menus/help displays are shown on the LCD-screen (64x128) beside the monitor.
Both analogue SAT-TV and CATV channels can be tuned in and viewed upon. The COMBOLOOK is able to work with the return-path signals in Cable-TV networks (5-65 MHz). According to the EN50083 standard. The TV-part presents the full range spectrum of 2-900 MHz which can be zoomed into smaller parts (min 13 MHz-span). The TV-part is very sensitive and accurate. It presents signals ±1dB (at +20 C). The SAT-part also has very high resolution and accuracy.
It presents measured data ±2 dB (at 20 C). The Sat-TV spectrum can be expanded (zoom in) for correct adjustment of the polarization (cross-polarization). The SAT- part presents (under one of the sub menus), digital information like BER (bit error rate), constellation-diagram (QPSK) and S/N (signal/noise ratio). The NIT function of the SAT-part can identify the various TV-satellites by reading out the NIT in the Bit stream (NIT = Network Information Table). The NIT also contains info about the transponders TV and Radio channels. COMBOLOOK can handle a lot of memory-positions and both spectrum-pictures and certain frequencies can be saved (both analogue and digital transponders). The power of the instrument is supplied by a built in and rechargeable battery.
Our Price £652.16(£782.59 Including VAT at 20%)
|