STACKER DE-STACKER Gives You 2x Satellite Signals Down 1x Cable Run To Your Receiver

Ideal for SMATV Systems, FreeSat PVR Recorders, Sky Plus HD Etc.
* Send 2 Satellite Signals Down 1 Single Cable.
* No Need To Install Any Extra Cables To Your Satellite System.
* Works Indoors And Outsite
* Works Direct From LNB Connection or With Multiswitches
Need 2 Satellite Signals And Only Have 1 Single Cable Run From Your Dish To Your Receiver And Are Not Able or You Do Not Want To Install An Extra Cable Then You Need The Stacker Destacker, This Will Give You 2 Satellite Signals From Your Dish LNB or Multiswitch Down 1 Cable To Your Satellite Receiver.
You Can Then Use Sky Plus, Sky HD or Any Freesat HDR Twin Recorder That Needs 2 Signals From Your Exsiting Single Cable Run.

QUESTIONS:

1. Are You Looking To Have Sky Plus or Freesat And Only Have 1 Single Cable Run Installed.
2. Are You Unable To Install Or Cannot Run A Second Cable To Your Receiver.
3. Do You Have A Second Output On Your Dish Or From A Multiswitch But Only Have 1 Cable.
4. Is Your Cable Run From The Dish or Multiswitch Less Than 60 Metres or 195 Feet in total.
If Above is Yes, Then You Can Use Our Stacker De-stacker To Send 2 Signals Down A Single Cable Run Up To 65m or 211 ft And Split Them The Other End See Here:

To Order Your Stacker De-Stacker Go Here

How To Use The Stacker-Destacker In Your System At Home.

Check The Following First:
1. Find your Dish or Multiswitch that feeds your system, usually the dish will be located on your wall or where the dish cables enter the building the take a note of how long your cables are from the dish to the receiver end.
2. Identify your existing cable that connects from the Dish to your box.
3. Make sure that the existing cable that comes from your dish or Multiswitch to your receiver has no other equipment installed in the line.
4. Check for any spare satellite signal outputs from the Dish LNB or Multiswitch you will need 2 signal feeds from the LNB. (If Only a single signal is available you will need to change your LNB to a Quad or Octo Etc)
5. Make Sure the Cable Run from your LNB or Multiswitch or Dish is Less Than 65 Metres or 211 Feet in Length.

If the above is OK and there is a spare port then all you need is our stacker de-stacker unit see here: To Order Your Stacker De-Stacker Go Here

Do You Live In A Flat or Apartment & Use A Shared Dish Etc.

Then You Need To Check The Following First:
1. Find your Headend Equipment or Multiswitch that feeds your flat, usually this will be located in a loft space or maybe a cabinet or cupboard space somewhere in the building where the dish cables enter the building, if you cannot find the headend equipment then contact your management company or landlord they should know.
2. Identify your existing cable that connects from the Multiswitch to your box.
3. Make sure that the existing cable that comes from your dish or Multiswitch to your receiver has no other equipment installed in the line.
4. Check for any spare satellite signal outputs from the Dish or Multiswitch. (There is normally some spares available)
5. Make Sure the Cable Run from your Headend Multiswitch or Dish is Less Than 65 Metres or 211 Feet in Length.

If the above is OK and there is a spare port then all you need is our stacker de-stacker unit see here: To Order Your Stacker De-Stacker Go Here

IF YOU ARE NOT SURE IF YOU CAN USE A STACKER DE-STACKER OR YOU NEED A SITE SURVEY SEE BELOW OR CALL US ON 01634 296929 FOR MORE ADVISE:

If you live in Kent, Sussex, Essex or SE London Area And Would Like A Site Survey* For A Second Signal From Your Dish, Multiswitch For Sky Plus Or Freesat Plus Etc, Just Contact Us On 01634 296929.

* Please Note Site Survey Will Be Chargeable.